Hammers, Chisels & Punches in Sri Lanka
39 products · island-wide delivery
Harden hammers, mallets, cold chisels and punches in Sri Lanka — claw, ball pein, machinist and stoning hammers with wood or fibreglass handles. Island-wide.

12Pcs Hollow Punch Set (3-16mm)

27Pcs Steel Letter (4mm)

27Pcs Steel Letter (6mm)

6Pcs Pin Punch Set (10")

7Pcs Auto Repair Tools Set

9Pcs Steel Number (4mm)

9Pcs Steel Number (6mm)

Ball Pein Hammer with Fiberglass Handle (450/1lb)

Ball Pein Hammer with Fiberglass Handle (680/1.5lb)

Ball Pein Hammer with Fiberglass Handle (910/2lb)

British Claw Hammer (27mm)

Centre Chisel (6x10x100)

Centre Chisel (8x12x115)

Chipping Hammer (500g)

Claw Hammer (450/16oz)

Claw Hammer (560/20oz)

Dead Blow Mallet (900g)

Flat Chisel TPR Handle (19x250)

Flat Cold Chisel (22x16x250)

Flat Cold Chisel (24x18x300)

French Type Claw Hammer (700g)

Hex Flat Chisel (17x280x25)

Hex Point Chisel (17x280)

Installation Mallet (27mm)

Installation Mallet (36mm)

Machinist Hammer with Fiberglass Handle (1000g)

Machinist Hammer with Fiberglass Handle (500g)

Point Chisel TPR Handle (19x250)

Point Cold Chisel (4x16x250)

Point Cold Chisel (4x18x300)

Rubber Mallet With Fiberglass Handle (225/8oz)

Rubber Mallet With Fiberglass Handle (450/16oz)

Rubber Mallet With Fiberglass Handle (680/24oz)

Stoning Hammer With Wood Handle (1000g)

Stoning Hammer With Wood Handle (1500g)

Stoning Hammer With Wood Handle (2000g)

Stoning Hammer with Fiberglass Handle (1000g)

Stoning Hammer with Fiberglass Handle (1500g)

Stoning Hammer with Fiberglass Handle (2000g)
About Hammers, Chisels & Punches in Sri Lanka
Hammers look interchangeable and are not. This range covers claw hammers in British and French patterns, ball pein and machinist hammers, stoning hammers in several weights, dead blow and rubber mallets, cold and point chisels with TPR handles, pin and hollow punch sets, and steel letter and number stamps — with a choice of wood or fibreglass handles across much of it.
Match the hammer to the work. A claw hammer is for nails and for pulling them; using it on a cold chisel chips the face, because it is not hardened for striking steel. A ball pein or machinist hammer is the one for chisels, punches and metalwork. A stoning hammer is for breaking and dressing stone and concrete, and comes in weights heavy enough to do real damage to whatever you are aiming at, including your hand. A dead blow mallet is filled with shot so it lands without bouncing back, which is what you want when seating a part you do not wish to mark. A rubber mallet does the same job more gently on tiles and trim.
Handles are a genuine choice, not just a price difference. A wooden handle absorbs shock well and can be replaced when it splits, which suits a tool that lives in one workshop. Fibreglass shrugs off damp, does not shrink or loosen in a humid store, and survives an overstrike that would break timber — worth considering for tools that live in a van or outdoors.
Punches and chisels are consumables in the sense that they mushroom over with use. A mushroomed head throws steel splinters when struck, so grind it back before it gets dangerous, and wear eye protection whenever steel meets steel.
Masons, carpenters, fabricators, mechanics, demolition crews, engineering workshops and maintenance teams all buy here, and the steel letter and number stamps get used for marking parts, tools and stock.
Genuine Harden stock supplied through our distributorship, priced openly and delivered island-wide. Unsure which weight suits your work? Message us on WhatsApp — heavier is not automatically better, and a hammer you can control all day beats one you cannot.
Buying in bulk, or need a stock check?
Message or call us and we'll help you right away — retail or trade.
