1 / 68Pcs Insulated Screwdrivers Set
Item No. 802008
Price on request
Eight insulated screwdrivers with a voltage tester, and the reason to buy the set rather than pick individual drivers is that electrical work does not let you choose which screw you meet.
The four slotted drivers run 2.5, 3.0, 5.5 and 6.5mm, and the three Philips cover PH0, PH1 and PH2. That spread is deliberate. The small 2.5mm slotted and PH0 are for control terminals, instrument connections and appliance work; the 5.5 and 6.5mm and the PH2 are for distribution board terminals, socket and switch fixings and gland plates. Using an oversized driver in a small terminal chews the screw head, and an undersized one in a large terminal cams out and cannot be tightened properly — and an under-tightened terminal is a connection that heats up and eventually fails.
The 140mm voltage tester is the item that should never leave an electrician's pocket. It tells you whether a circuit is live, which is the step everything else depends on.
The blades are S2 steel, hardened and tempered. S2 is a tool steel chosen for driver blades because it resists the tip rounding off under load — a rounded tip cams out, and camming out damages the screw and the terminal.
VDE/GS certification to EN60900 means each driver is built and individually tested for live working at up to 1000V AC. Note that the insulation runs down the blade and stops short of the tip, which is intentional: it leaves only the minimum bare metal needed to engage the screw, so there is no exposed shank to bridge to an adjacent terminal.
The two-colour handles work as a wear indicator — if the inner colour shows through, the driver goes out of service.
And the principle behind all of it: isolate, lock off, prove dead with the tester, then work. Insulated tools are there for the circuit that turned out to be live when it should not have been.
The handles are shaped for grip, which on a driver matters directly, since torque is limited by how hard you can hold it.
Supplied in a colour box. The buyers are electricians, panel builders, maintenance technicians, appliance and electronics repairers, and solar installers.
We stock 6 and 11-piece insulated sets that combine drivers with pliers. Message us on WhatsApp and we will price them, delivered island-wide.
Specifications
- VDE/GS certificated
- Manufactured according to EN60900
- Made of S2 material
- Hardened and tempered
- Ergonomic shape for easy to handle
- 0.4X2.5X75mm,0.6X3.0X100mm,1.0X5.5X125mm,1.2X6.5X150mm insulated slotted screwdriver
- PH0X3.0X60mm,PH1X4.5X80mm,PH2X6.0X100mm insulated phillips screwdriver
- 140mm voltage tester
- Packed by color box
Packing: 20 pcs per carton
Add it to your order and we'll confirm the price and stock, or message/call us right away — retail or trade.
Ask about this product
Leave your details and we'll get back to you — or reach us instantly on WhatsApp or by phone.
More safety products
View all →Buying in bulk, or need a stock check?
Message or call us and we'll help you right away — retail or trade.









