1 / 811Pcs Insulated Tools Set
Item No. 802111
Price on request
Eleven insulated tools in a canvas bag, and the five additions over the six-piece set are what turn a fault-finding kit into an installation kit.
The shared core is a 7" combination plier, a 6" diagonal cutter, slotted and Philips drivers and a 140mm voltage tester. What this set adds is an 8" long nose plier, a 6" wire stripping plier, a 180mm cable knife, an extra 3.0mm slotted driver and a PH1 Philips.
Each of those covers a job the smaller set cannot. The long nose reaches into deep enclosures and forms the hook on a conductor end that goes round a terminal screw. The wire stripper removes insulation without nicking the conductor — and a nicked strand is a weak point that heats under load and fails inside a wall years later. The cable knife opens the outer sheath of armoured and multi-core cable, which is exactly the job people improvise with a utility knife and cut into the cores doing it. The extra driver sizes mean you are less often using a slightly wrong one and damaging the terminal.
Together that is a full first-fix and second-fix kit for installation work rather than a service kit.
Every tool is VDE/GS certified to EN60900, built and individually tested for live working at up to 1000V AC, with each proof-tested well above its rating rather than sampled.
The two-colour insulation runs through the set as a wear indicator — two contrasting layers, so damage through the outer one shows the inner colour and takes that tool out of service. Check the handles at the start of a job. It takes seconds and it is the entire reason the tools are made that way.
The canvas bag is doing real work: insulated tools are only protective while their insulation is intact, and loose tools in a bag full of drill bits and fixings is how insulation gets cut.
And the rule that sits above all of it: isolate, lock off, prove dead with the tester before you work. These tools protect you when the isolation turns out not to have been what you believed.
The buyers are installation electricians, panel builders, industrial and plant maintenance electricians, and solar installers.
If you only need a service kit, the 6-piece set is lighter and cheaper. Message us on WhatsApp and we will compare them, delivered island-wide.
Specifications
- VDE/GS certificated
- Manufactured according to EN60900
- 7" insulated combination plier
- 6" insulated diagonal cutting plier
- 8" insulated long nose plier
- 6" insulated wire stripping plier
- 2.5x75mm, 3.0x100mm, 5.5x125mm insulated slotted screwdriver
- PH1x80mm, PH2*100mm insulated phillips screwdriver
- 140mm voltage tester
- 180mm cable knife
- Packed by canvas bag
Packing: 12 pcs per carton
Add it to your order and we'll confirm the price and stock, or message/call us right away — retail or trade.
Ask about this product
Leave your details and we'll get back to you — or reach us instantly on WhatsApp or by phone.
More safety products
View all →Buying in bulk, or need a stock check?
Message or call us and we'll help you right away — retail or trade.











