11Pcs Hole Saw Kits For Wood

The sizes run 19, 22, 29, 32, 38, 44, 51 and 64mm, and that range covers the everyday penetrations of building services: cable entries and glands, conduit and small pipe, back boxes and accessory cutouts in board and panelling, waste and supply pipe through cabinets and joinery, and holes through studs and joists for cable runs.

It is worth being clear about the difference between this kit and the large hole one listed beside it, because the piece counts invite the wrong comparison. This is not a smaller or cheaper version of that kit. It is a different range for different work. If you fit downlights and ventilation, you want the large sizes. If you run cables and pipes, you want these. The sixteen piece kit is both ranges together.

The teeth are high carbon steel at HC46-53 with variable pitch spacing, which suits timber, board, plasterboard and plastics. For steel, the bi-metal saws are the correct choice.

One practical habit that saves a great deal of frustration with small hole saws in particular: the disc of material cut out, the slug, jams inside the cup, and on a small saw there is very little room to get it out. Most hole saws have slots in the side of the cup for exactly this, so you can push a screwdriver through and lever the slug free. Do it after every hole rather than after several, because two slugs packed in a small cup are a genuine nuisance.

Buyers are electricians, plumbers, air conditioning fitters, carpenters, shopfitters and hardware shops.

Message 94 77 111 8880 and tell us whether your work is services or fittings, and we will point you at the right kit. Island-wide delivery.