27Pcs 3/4" Dr.Socket Set

The sockets are forged chrome vanadium, the standard alloy for impact-adjacent hand tools because it takes hardening without turning brittle. There are 22 of them, running 19mm all the way to 60mm — 19, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32, 33, 34, 35, 36, 38, 41, 46, 50, 55 and 60mm. That top end matters: 55mm and 60mm sockets are exactly the sizes that are impossible to buy locally when you need one at short notice, and a 3/4" set without them is only half a set.

They are bihexagonal — twelve-point. Twelve points let you re-seat the socket every 30 degrees instead of every 60, which is the difference between turning a nut and not turning it when you are working against a chassis rail or inside a wheel arch. On badly corroded fasteners a six-point socket grips better, so the honest advice is that this set is built for access and range rather than for shifting seized bolts.

Alongside the sockets you get a flipper ratchet, a 450mm sliding T-bar, extension rods at 4" and 8", and a universal joint. Those four pieces are what make the set usable rather than just complete. The slider gives you real leverage on a stubborn nut without a cheater pipe; the universal joint reaches fasteners that sit at an angle to the socket; the extensions get you down into a recess. A universal joint on 3/4" drive is a genuinely useful inclusion — most sets at this size leave it out.

This is a set for garages working on lorries, buses, tractors and three-wheeler chassis work at the heavier end, for plant and generator maintenance, and for fabrication shops bolting up structural steel. It is not a set for light automotive or household work — for that, a 1/4" or 1/2" Harden set is the right buy and considerably cheaper. Hardware shops stocking for the trade tend to keep one or two of these on the shelf rather than a row of them, because they sell to a specific customer who knows exactly why he needs 3/4" drive.

It ships as a single cased set, and we deliver island-wide. If you are fitting out a workshop from scratch and want to price this alongside a 1/2" set and a torque wrench, message us on WhatsApp and we will put the numbers together.