PVC Pipe Cutter (32)

Name: PVC Pipe Cutter (32)
Brand: Harden
SKU: 600850

Item No. 600850

Price on request

A plastic pipe cutter does one job and does it in a second: it shears straight through PVC with a single squeeze of the hand, leaving a clean square end and no dust, no swarf and no noise. Compared with a hacksaw — which leaves a rough angled end, drops shavings into the pipe, and needs the end filed before it will seat properly in a socket — it is not a marginal improvement. On a day of first-fix pipework it is the difference between finishing and still cutting.

This is the 32mm size, which covers the majority of pipework in a house: cold water distribution, waste and vent runs at the smaller end, garden and irrigation line, and electrical conduit. If you are working on domestic installation rather than mains, 32mm is where most of the cuts are.

The body is a PP handle with a stainless steel blade, and it is worth being straight about what that combination is for. Polypropylene keeps the tool light and cheap, and it does not corrode. That makes this the cutter to keep in a bag as the everyday one, and the one a dealer sells across the counter in numbers. It is not the tool to lean on for a whole day of continuous 42mm work — the aluminium-handled cutters in the range exist for that, and for the larger sizes. Buy this one for what it is: a fast, light, inexpensive cutter for the pipe sizes most people actually cut.

The blade being stainless matters more than it might sound. These cutters live in wet trenches, in cement dust, in the bottom of a bag with damp offcuts. A carbon steel blade rusts, and a rusted blade drags through PVC instead of shearing it, tearing the cut and crushing the pipe end out of round.

The buyers are plumbers on domestic installation, electricians running PVC conduit, irrigation and garden contractors, building maintenance staff, and households doing their own pipework. Hardware dealers sell more of this size than the larger cutters combined.

Cut square and cut once. Sit the pipe fully into the jaw so the blade meets it at a right angle, and squeeze in one continuous movement rather than a series of nibbles, since nibbling leaves a stepped edge that will not push home. Keep the blade clean and give the pivot an occasional drop of oil. On cold mornings or on old, brittle pipe, go slightly slower — PVC that has been in the sun for years can crack rather than shear, and a slower squeeze gives it time to give way properly. Blades are replaceable, so when it starts to crush instead of cut, change the blade rather than the tool. Ask us on WhatsApp for a price, or for it alongside solvent cement and fittings.