Long Torx Hex Key Wrench (T27x10pcs)

A great many budget Torx sets run T10, T15, T20, T25, T30, T40 and stop, quietly leaving T27 out because it is used less often than its neighbours. That works perfectly well until the day a machine has T27 fixings in it, and then nothing in the box will do. T25 turns inside the recess without gripping. T30 will not go in at all. There is no near enough, and no amount of force changes that.

It is met on some European vehicle assemblies, on appliance and machinery chassis, on generator and compressor panels, on garden and grounds equipment, and across a range of imported industrial gear.

That is exactly the situation single keys exist for. A workshop with a good set and one missing size does not need a second set, it needs the one key. And because T27 is not a size ordinary hardware shops keep, it is worth having on the shelf before the job arrives rather than after, since sourcing an uncommon Torx size in a hurry in Colombo is not a five minute errand.

Worth knowing about the drive itself while you are here: the T number is a designation for the profile, not a measurement of anything. T27 is not 27 millimetres of anything, and the numbers do not step in even increments, which is why guessing a size from a photograph or from memory rarely works. Match it against the fastener, or bring the fastener in.

The long pattern helps because fixings of this size are usually sunk into a panel or a housing and need a key that reaches while leaving arm to hold.

Forged chrome vanadium, hardened and tempered.

Buyers are vehicle technicians working on European makes, appliance and machinery engineers, generator and plant maintenance, garden machinery workshops, and dealers who stock the sizes other shops skip.

The catalogue name carries Harden's carton quantity in brackets. This is a single T27 key. If you are unsure whether your fixings are T25, T27 or T30, message 94 77 111 8880 and we will help you identify it rather than have you buy three. We deliver island-wide.